Samsung galaxy s2, gt i9100g with a yellow triangle and black excalation mark in the middle All threads completed. (succeed 0 / failed 0) from odin? - Mistakenly click update on kies for my samsung galaxy s2 (gt i9100g), then it directly enter the downloading mode (i dont know if my phone already set to usb debugging or not), suddenly it say not able to update and im still in having the blackscreen on my phone written "downloading... do not turn off the target" then i just open odin3 and tried to update to CM7 update (i hv yellow port) then it says success.. etc... it didnt reboot automatically as it should, so turn of and on again .. but then i get this 1st screen written "samsung galaxy s2, gt i9100g with a yellow triangle and black excalation mark in the middle" and it stays like that.before that did try to root using superclick but it hang.. now it i run again the odin, it says " All threads completed. (succeed 0 / failed 0)".. im not able to go anywhere and stuck here.. please help me.. im a new bie.. "

Samsung galaxy s2, gt i9100g with a yellow triangle and black excalation mark in the middle all threads completed. (succeed 0 / failed 0) from odin?

Mistakenly click update on kies for my samsung galaxy s2 (gt i9100g), then it directly enter the downloading mode (i dont know if my phone already set to usb debugging or not), suddenly it say not able to update and im still in having the blackscreen on my phone written `downloading... do not turn off the target` then i just open odin3 and tried to update to CM7 update (i hv yellow port) then it says success.. etc... it didnt reboot automatically as it should, so turn of and on again .. but then i get this 1st screen written `samsung galaxy s2, gt i9100g with a yellow triangle and black excalation mark in the middle` and it stays like that.before that did try to root using superclick but it hang.. now it i run again the odin, it says ` All threads completed. (succeed 0 / failed 0)`.. im not able to go anywhere and stuck here.. please help me.. im a new bie.. `

Topic: Samsung Galaxy
Asked by: ezrina98
In Computers & Internet > Software > Exclamation

"This is how i successfully unbricked my phone..."

Pretty much same thing happened to me and this is how I successfully unbricked my phone: http://www.dreevoo.com/en/content.php?id=669

Hope it helps!

Was this answer helpful? Yes | No

Comment

Report

ha.dy.507

Level 1 (Contributor)
2 Answers

What u need is odin 3 and stock firmware your phone...stock firmware available in sammobile good luck.

Was this answer helpful? Yes | No

Comment

Report

ezrina98

Level 1 (Contributor)
2 Answers

"To know that the screen is the bootloader which mean it just stuck at..."

I just got to know that the screen is the bootloader which mean it just stuck at bootloader (with a yellow triangle and black exclamanation mark) and i am not able to enter downloading mode/recovery mode either. my phone is not detectable by pc/odin/kies anymore (i guess because im stuck at the bootloader).. i found a few solution but all need to enter either recovery mode or downloading mode (while i cant).. please advice me... i really hope i manage o solve this issue with my samsung galaxy s2..

Was this answer helpful? Yes | No

 Someone said: we need a an answer plzzzzzzz

Was this comment helpful? Yes | No

Comment

Report

Anonymous

"Samsung s2 gt-i9100g still stuck at setup connection an it just appear yellow triangle..."

Hi,,,,i am having problem just now...my samsung s2 gt-i9100g still stuck at setup connection an it just appear yellow triangle only....nee urgent help.... reply me as soon as possible.

Was this answer helpful? Yes | No

Comment

Report

ha.dy.507

Level 1 (Contributor)
2 Answers

Try the new odin 3 that is a answer.

Was this answer helpful? Yes | No

Comment

Report

"Is the ansi symbol for "danger." a yellow triangle with..."

Whenever a product carries with it a hazard or a risk, the manufacturers have a series of obligations imposed by tort law and by the American National Standards Institute (ANSI). One of these obligations states that, when the product is as safe as possible, given its intended use and design, any remaining hazards must be addressed by the use of a warning label. ANSI also has established specific pictorial safety alert symbols. One well-known ANSI pictorial symbol is a lightning bolt, which signifies the product is electrical and can be dangerous if electrical hazards are not avoided. A white triangle set inside a red square, with a red exclamation point inside the triangle, is the ANSI symbol for "Danger." A yellow triangle with a black exclamation point in the center is the ANSI symbol for "Caution." Read more: Requirements for Product Warning Labels | eHow.com http://www.ehow.com/about_5105806_requirements-product-warning-labels.html#ixzz1l3AKiShn.

source: What does a yellow triangle with an exclamation mark in the middle mean in pharmacy?

Was this answer helpful? Yes | No

Comment

Report

MARKtheSPARK47

Level 9 (Master)
1047 Answers, 1 Friend, 9 Followers

"Symbol you mentioned which is a blue triangle with a yellow exclamation mark means..."

The symbol you mentioned which is a blue triangle with a yellow exclamation mark means caution.
This symbol occurs in phone when:
1. no simcard or simcard is not properly inserted
2. no network service or phone is under flight mode
3. disconnected/loose antenna
4. your phone fails to load applications
5. you have use or bring an icon of a TASK KILLER in your screen.

Thank you.

source: What does the blue triangle with yellow exclamation mark in middle with green andriod under it mean on my pantech phone?

Was this answer helpful? Yes | No

Comment

Report

immaskyscraper6

Level 1 (Contributor)
1 Answer

"You can find your phone there and download the manual ..."

Every phone is different and every carrier is slightly different. To find out, go to http://www.samsung.com/us/mobile/cell-phones. You can find your phone there and download the manual , which will tell you everything you want to know.

source: What does this symbol mean . a yellow triangle with a black battery and a line in the middle of the triangle. it only appears when i tie to charge?

Was this answer helpful? Yes | No

Comment

Report

dorice87

Level 1 (Contributor)
2 Answers

"Help is that perhaps not let your phone get to flat so that it..."

Well some phones do that you just cant help it another thing that might help is that perhaps not let your phone get to flat so that it actually turns itself off that might help:) hope thos has helped.

source: My galaxy s2 wont turn on when i try to charge it it gives me battery level with a yellow triangle with punchuation mark in black need help?

Was this answer helpful? Yes | No

Comment

Report

Anonymous

"This has to do with a problem with your traction control..."

This has to do with a problem with your traction control. Have it looked at by a dealer.

source: I have a vw golf which has just displayed on the dash a yellow triangle with a exclamation mark in the middle and a near full circle round the triangl?

Was this answer helpful? Yes | No

Comment

Report

Anonymous

Have you tried turning it off and on again?

source: Problem with my galaxy s2 gt-i9100g whenever i turn it on a black screen appears with mobile icon and yellow triangle with exclamation mark and pc?

Was this answer helpful? Yes | No

Comment

Report

user8562129

Level 1 (Contributor)
3 Answers

My phone is freezed in start up menu.

source: My galaxy s2 i9100g stuck on start up with yellow triangle?

Was this answer helpful? Yes | No

Comment

Report

Add Your Answer

Samsung galaxy s2, gt i9100g with a yellow triangle and black excalation mark in the middle all threads completed. (succeed 0 / failed 0) from odin?

Mistakenly click update on kies for my samsung galaxy s2 (gt i9100g), then it directly enter the downloading mode (i dont know if my phone already set to usb debugging or not), suddenly it say not able to update and im still in having the blackscreen on my phone written "downloading... do not turn off the target" then i just open odin3 and tried to update to CM7 update (i hv yellow port) then it says success.. etc... it didnt reboot automatically as it should, so turn of and on again .. but then i get this 1st screen written "samsung galaxy s2, gt i9100g with a yellow triangle and black excalation mark in the middle" and it stays like that.before that did try to root using superclick but it hang.. now it i run again the odin, it says " All threads completed. (succeed 0 / failed 0)".. im not able to go anywhere and stuck here.. please help me.. im a new bie.. "

Users who viewed this problem also asked the following similar questions. Can you answer these?

Can you help us by answering one of these related questions?

Ask Your Question Fast!

Leader BoardWhat's this?


Leading Today		Pts	Helpful

1.	krazeeme6	600	67%
2.	stripedsh	400	85%
3.	todnih	400	70%
4.	lunarmyst	400	72%
5.	charitycr	200	100%
6.	jaky_rodr	200	100%
7.	chiefx	200	73%
8.	nitin gro	200	100%
9.	KristaNeu	200	66%
10.	medbrahim	200	100%
11.	rocjules7	200	63%
12.	yaeljam01	200	70%
13.	alexbrian	200	100%
14.	Me-zha	200	81%
15.	benicarol	200	67%

Leading this Week		Pts	Helpful

1.	Khalel	1000	71%
2.	todnih	1000	70%
3.	radagast	800	80%
4.	ceejhey22	800	72%
5.	mikemanga	604	66%
6.	KristaNeu	600	66%
7.	nzppalma	600	80%
8.	stripedsh	600	85%
9.	nosterafu	600	76%
10.	krazeeme6	600	67%
11.	yaeljam01	600	70%
12.	moneygrab	600	70%
13.	sormitaa	421	100%
14.	amir.sepe	400	81%
15.	Time4Life	400	83%
16.	Sebastian	400	68%
17.	Me-zha	400	81%
18.	NicanorLo	400	69%
19.	rio_cm080	400	65%
20.	sonic85	400	80%

Leading this Month		Pts	Helpful

1.	radagast	3602	80%
2.	Khalel	3200	71%
3.	stripedsh	2804	85%
4.	todnih	2600	70%
5.	ceejhey22	2400	72%
6.	mikemanga	1810	66%
7.	Gheezmo	1802	82%
8.	helpisher	1776	100%
9.	maccolar	1692	60%
10.	nosterafu	1602	76%
11.	vonvane	1600	91%
12.	bethany12	1402	94%
13.	vinzxalvi	1400	68%
14.	Alesia	1290	93%
15.	Arbi2k	1238	82%
16.	aubreybri	1200	85%
17.	ennai	1200	73%
18.	guylamar2	1047	100%
19.	KristaNeu	1003	66%
20.	rochy.sol	1000	94%
21.	jctracy	1000	62%
22.	kuramaens	1000	64%
23.	fugazzi69	1000	73%
24.	Time4Life	1000	83%
25.	lolitapos	1000	69%

Daniel:	Hi, my name is Daniel.
Daniel:	Can I connect you with a community expert to help you with your questions?

E-Mail:
Username:
Password:
Re-Type Password:

"This is how i successfully unbricked my phone..."

"To know that the screen is the bootloader which mean it just stuck at..."

"Samsung s2 gt-i9100g still stuck at setup connection an it just appear yellow triangle..."

"Is the ansi symbol for "danger." a yellow triangle with..."

"Symbol you mentioned which is a blue triangle with a yellow exclamation mark means..."

"You can find your phone there and download the manual ..."

"Help is that perhaps not let your phone get to flat so that it..."

"This has to do with a problem with your traction control..."

Or use an existing account

You must be logged in to perform this action.
Please login or register a new account.

Create an account

	Daniel Community Expert Coordinator Level: Gold Positive Feedback: 92.7%
Daniel is a chat coordinator with Ask Me Fast. Daniel matches your request with our community of online experts. Daniel has achieved "Gold" level status, the highest overall rating possible. Daniel has a positive feedback rating of 92.7%

"This is how i successfully unbricked my phone..."

"To know that the screen is the bootloader which mean it just stuck at..."

"Samsung s2 gt-i9100g still stuck at setup connection an it just appear yellow triangle..."

"Is the ansi symbol for "danger." a yellow triangle with..."

"Symbol you mentioned which is a blue triangle with a yellow exclamation mark means..."

"You can find your phone there and download the manual ..."

"Help is that perhaps not let your phone get to flat so that it..."

"This has to do with a problem with your traction control..."

Or use an existing account

You must be logged in to perform this action. Please login or register a new account.

Create an account

You must be logged in to perform this action.
Please login or register a new account.